Audison APBMW S8-2

Code: ec0c74128116

*£229.99 each

APBMW S8-2

SUBWOOFER FOR BMW-MINI

Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fibreglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allowing the subwoofer to fit perfectly into the box, decoupling it from vibration.

The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2-ohm impedance and S8-4 with 4-ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W RMS to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite while maintaining the depth of installation unaltered.

£239.99

In Stock

Description

APBMW S8-2 Technical Data
ComponentWoofer
Size mm (in.)200 (8)
Power Handling W peakW continuos300150
Impedance Ω2
Frequency Response Hz40 ÷ 500
Magnet size D x d x h mm(in.)48 (1.89) x 18 (0.71) x 7 (0.28)
Weight of one speaker kg (lb.)1,21 (2.67)
Voice Coil Ø mm (in.)50 (2)

 

APBMW S8-2 Features

Developed with electroacoustic parameters customized for BMW-Mini
– To increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box.
Neodymium Magnetic group
– With an inverted acoustic structure featuring an internal cone, to maximize performance while minimizing bulk and weight.
38 mm voice coil wound on an aluminium support
– For a considerable power dissipation and stability even during high excursions.
Two 5 mm gaskets provided
– For OEM placements.
2-ohm configuration for maximum output
– In combination with AP 8.9 bit in active multi-amplification.

 

For more information speak to the experts: CLICK TO CALL

Images

  • The ABS plastic basket, reinforced with fibreglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range.
  • The ABS plastic basket, reinforced with fibreglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range.

Additional information

Dimensions60 × 60 × 60 cm