Audison Prima AP5.9 bit

Code: 51f6c87d819d

AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2 Ω. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.

Audison Prima AP5.9 bit doc

Audison Prima AP5.9 manual


Power Output

Load. Imp. 5 Channels
4 Ohm 20 W x 2 + 50 W x 2 + 150 W x 1
2 Ohm 40 W x 2 + 90 W x 2 + 270 W x 1

Accessories [NOT INCLUDED]

DRC – Digital Remote Control
The DRC is the digital interface between the AP5.9 bit and the user. The DRC mounted in the vehicle dashboard, provides access to control of the inputs and volume adjustments, balance, fader and subwoofer volume. Providing source selection between main, aux and optical inputs, it also provides four of the configurations created and saved by the bit one right at hand. The DRC also controls the functions of the Audison Thesis amplifiers when these are installed in the same system.

ECK DRC
DRC Cable Extension kit for installations on especially long vehicles. Total length of the supplied cable with the extension is equal to 6,5 m / 225,90″.

OP 1.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 1,5 m / 59,05″.

OP 4.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 4,5 m/177,16″

STA • F/F Socket TOSLINK adapter
Optical adapter to extend optical cables featuring TOSLINK connectors.

APL 2 – (AP4 D / AP1 D) link cable

Cable to connect AP5.9 bit to AP4 D and AP1 D amplifiers.

AP T-Harness “DCC”.

T-Harness “DCC” is the Plug&Play solution to integrate Audison Prima with the

factory car audio system.

AP Extension cables.

The Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers.

AP Speakers Output cables.

The AP Speakers Output for AP5.9 bit is dedicated to the connection of the AP bit amplifiers with the input/output Extension cable.

SPM4 – 4 Ch Stereo Passive Mixer

Recommended to extend the number of inputs of AP bit amplifiers because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.



£649.99

In Stock

Images

  • AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system

Additional information

Dimensions 30 × 30 × 30 cm