Audison Prima APS 8 D
Audison Prima APS 8 D
A neat dual coil, 8″subwoofer designed to sound great in a compact enclosure. Prima subwoofers employ a carefully worked out cone, dust cap, and basket geometry which offers surprising excursion for such a shallow subwoofer. On-board cooling technology allows the subwoofer base plate to be mounted close to the rear wall of an enclosure without danger of over heating. A perfect match for the rest of the Audison Prima rang.
- SPECIFICATIONS
- Composition: Double coil Subwoofer
- Size: 200 mm (8”)
- Power Handling: 250 W Continuous Power
- 500 W Peak Power
- Impedance (Ohms): 4 + 4
- Sensitivity: 83.5 dB
- Magnet: High density flux ferrite
- Cone: Cotton-Fibre pressed paper
- Xmech: 16.5 mm (0.65 in.)
£169.99
In StockAdditional information
Dimensions | 60 × 60 × 60 cm |
---|
Related products
-
CAR AUDIO
Audison Prima APS 8 R
This superb range of shallow subwoofers are designed and developed to overcome the short excursion limitations suffered by many competitor products which lead to underwhelming performance. Audison Prima subwoofers truly are the answer for those wanting maximum bass form minimum space.
Technical Specification
Component: Single coil Subwoofer
Size: 200 mm (8”)
Power Handling: 250 W Continuous Power
500 W Peak Power
Impedance (Ohms): 4
Sensitivity: 84 dB/W/m
Magnet: High density flux ferrite
Cone: Cotton-Fibre pressed paper
Xmech: 16.5 mm (0.65″)(0 reviews)£169.99 Add to basket -
CAR AUDIO
Audison Prima AP5.9 bit
AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2 Ω. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.
Power Output
Load. Imp. 5 Channels 4 Ohm 20 W x 2 + 50 W x 2 + 150 W x 1 2 Ohm 40 W x 2 + 90 W x 2 + 270 W x 1
Accessories [NOT INCLUDED]
DRC – Digital Remote Control
The DRC is the digital interface between the AP5.9 bit and the user. The DRC mounted in the vehicle dashboard, provides access to control of the inputs and volume adjustments, balance, fader and subwoofer volume. Providing source selection between main, aux and optical inputs, it also provides four of the configurations created and saved by the bit one right at hand. The DRC also controls the functions of the Audison Thesis amplifiers when these are installed in the same system.ECK DRC
DRC Cable Extension kit for installations on especially long vehicles. Total length of the supplied cable with the extension is equal to 6,5 m / 225,90″.OP 1.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 1,5 m / 59,05″.OP 4.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 4,5 m/177,16″STA • F/F Socket TOSLINK adapter
Optical adapter to extend optical cables featuring TOSLINK connectors.APL 2 – (AP4 D / AP1 D) link cable
Cable to connect AP5.9 bit to AP4 D and AP1 D amplifiers.
AP T-Harness “DCC”.
T-Harness “DCC” is the Plug&Play solution to integrate Audison Prima with the
factory car audio system.
AP Extension cables.
The Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers.
AP Speakers Output cables.
The AP Speakers Output for AP5.9 bit is dedicated to the connection of the AP bit amplifiers with the input/output Extension cable.
SPM4 – 4 Ch Stereo Passive Mixer
Recommended to extend the number of inputs of AP bit amplifiers because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.
(0 reviews)£649.99 Add to basket -
CAR AUDIO
Audison APBMW S8-4
*£229.99 each
APBMW S8-4
SUBWOOFER FOR BMW-MINI
Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fibreglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allowing the subwoofer to fit perfectly into the box, decoupling it from vibration.
The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2-ohm impedance and S8-4 with 4-ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W RMS to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite while maintaining the depth of installation unaltered.
(0 reviews)£229.99 Add to basket -
CAR AUDIO
Audison Prima AP 6.5
The Audison Prima AP6.5 – 6.5inch woofer -designed for upgrade & replacement with Oem type woofers that are generally fitted in vehicles that have a active system.
The Audison AP 6.5 feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofer don’t employ any filter, to maximize efficiency: the dome profile has been optimised with Klippel R&D Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.
Featuring a 32 mm pure copper mobile voice coil, for high power handling and outstanding low frequency control this Prima 6.5″ has a treated water-repellent paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimised using Klippel R&D Scan Vibrometer technology.
Tecnical Data
Comp Woofer Size 165 mm (6,5″) Power Handling 70 W Continuous Power
210 W Peak PowerImpedance 4 Ω Frequency Response 60 ÷ 5k Hz Sensitivity 93,5 dB/Spl Magnet High density flux ferrite Dome Water-repellent treated paper cone (0 reviews)£84.99 Add to basket