Audison Prima APSP G6 Vw Golf Mk6
Vw Golf Mk6 -Audison Prima APSP G6 audio upgrade system.
Audison’s new Audison Prima APSP G6 full audio system has been specifically designed for the VW Golf MK6. The Vw Golf system upgrade comprises a pair of Audison Prima two-way components for the front doors and a specific custom subwoofer mounted in a bespoke, discrete sealed enclosure driven by the highly capable Prima 8.9bit amplifier/processor.
Audison H.Q have developed several different preset sound settings to get the best performance from the Vw Golf system. The Audison Prima APSP G6 Vw Golf kit is supplied with all of the accessories including interconnection cables.
Add this system to your wish list and drive to excellent sounds with Audison!
*Professional fitting & set up required with this product. For best advice please contact sales team .
**Important Notes ; Vehicle specific kit will only fit Vw Golf Mk6.
Audison Prima APBX 8R
This neat little subwoofer and enclosure combo is reflex loaded and tuned to develop high level at low frequencies. Exploiting the natural boost in output found in most cars below 60 Hz known as “cabin gain”, the 8-inch single 4 Ω voice-coil subwoofer has a powerful motor that maximises efficiency. This makes the APBX 8 R the perfect companion to the Audison Prima AP8.9 bit amplifier. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion to a minimum within the entire audio spectrum offering exceptional output from a modest amplifier such as bridged channels of an Audison Prima AP4.9 bit / AP4 D delivering 260 W rms.
LOADED REFLEX SUB BOX
Size: 200 mm (8”)
Power Handling: 250 W Continuous Power 500 W Peak Power
Impedance (Ohms): 4
Sub box size mm (in.): 473 (18.62) x 334 (13.15) x 109 (4.29)
Magnet: High density flux ferrite
Cone: Cotton-Fibre pressed paper
Weight of one component kg (lb): 6.64 (14.64)Rated 0 out of 5(0 reviews)£309.99 Add to basket
Audison Prima AP5.9 bit
AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2 Ω. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.
Load. Imp. 5 Channels 4 Ohm 20 W x 2 + 50 W x 2 + 150 W x 1 2 Ohm 40 W x 2 + 90 W x 2 + 270 W x 1
Accessories [NOT INCLUDED]
DRC – Digital Remote Control
The DRC is the digital interface between the AP5.9 bit and the user. The DRC mounted in the vehicle dashboard, provides access to control of the inputs and volume adjustments, balance, fader and subwoofer volume. Providing source selection between main, aux and optical inputs, it also provides four of the configurations created and saved by the bit one right at hand. The DRC also controls the functions of the Audison Thesis amplifiers when these are installed in the same system.
DRC Cable Extension kit for installations on especially long vehicles. Total length of the supplied cable with the extension is equal to 6,5 m / 225,90″.
OP 1.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 1,5 m / 59,05″.
OP 4.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 4,5 m/177,16″
STA • F/F Socket TOSLINK adapter
Optical adapter to extend optical cables featuring TOSLINK connectors.
APL 2 – (AP4 D / AP1 D) link cable
Cable to connect AP5.9 bit to AP4 D and AP1 D amplifiers.
AP T-Harness “DCC”.
T-Harness “DCC” is the Plug&Play solution to integrate Audison Prima with the
factory car audio system.
AP Extension cables.
The Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers.
AP Speakers Output cables.
The AP Speakers Output for AP5.9 bit is dedicated to the connection of the AP bit amplifiers with the input/output Extension cable.
SPM4 – 4 Ch Stereo Passive Mixer
Recommended to extend the number of inputs of AP bit amplifiers because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.
Rated 0 out of 5(0 reviews)£649.99 Add to basket
Audison Prima AP 6.5
The Audison Prima AP6.5 – 6.5inch woofer -designed for upgrade & replacement with Oem type woofers that are generally fitted in vehicles that have a active system.
The Audison AP 6.5 feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofer don’t employ any filter, to maximize efficiency: the dome profile has been optimised with Klippel R&D Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.
Featuring a 32 mm pure copper mobile voice coil, for high power handling and outstanding low frequency control this Prima 6.5″ has a treated water-repellent paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimised using Klippel R&D Scan Vibrometer technology.
Comp Woofer Size 165 mm (6,5″) Power Handling 70 W Continuous Power
210 W Peak Power
Impedance 4 Ω Frequency Response 60 ÷ 5k Hz Sensitivity 93,5 dB/Spl Magnet High density flux ferrite Dome Water-repellent treated paper coneRated 0 out of 5(0 reviews)£84.99 Add to basket
Audison Prima AP4 D
.Add this 4-channel Prima amplifier to a 4.9 bit or 5.9 but amplifier. When integrating with factory fitted multi-speaker systems this add on is a must for expanding the capabilities of Prim bit amplifiers. Sharing the same footprint, up to three Prima amplifiers can be stacked for maximum space efficiency without over heating.
Load Imp. 4 Channels 2 Channels (bridge) 4 Ohm 70 W x 4 260 W x 2 2 Ohm 130 W x 4Rated 0 out of 5(0 reviews)£349.99 Add to basket