Skinz Expert Bulk pack
The Expert Bulk pack-the best all round sound deadening for the pure Audiophile27 Sheets – 375mm x 265mm x 3mm (2.8sq.m – 30sqft)
Skinz sound deadening and panel lining products – For great car audio it all begins with properly treating your vehicle doors & panels . Flexing of the metal panels & rattles from plastic trims not only ruin a great sound system in a car but becomes a nuisance for the drivers entertainment . With the Skinz soundproofing material applied to your vehicle your can eliminate & cancel rattles & vibrations that would resonate through your vehicle. Great Skinz soundproofing goes as far as possible in eradicating noises with add-on options Skinz products like wave diffuser which will absorb the sound issuing from the rear of your speakers to prevent that sound reflecting back into the speakers. The importance of sound treatment such as the Skinz range should never be underestimated.
Great car sounds with great soundproofing!
- CAR AUDIO
Audison Prima APS 8 R
This superb range of shallow subwoofers are designed and developed to overcome the short excursion limitations suffered by many competitor products which lead to underwhelming performance. Audison Prima subwoofers truly are the answer for those wanting maximum bass form minimum space.
Component: Single coil Subwoofer
Size: 200 mm (8”)
Power Handling: 250 W Continuous Power
500 W Peak Power
Impedance (Ohms): 4
Sensitivity: 84 dB/W/m
Magnet: High density flux ferrite
Cone: Cotton-Fibre pressed paper
Xmech: 16.5 mm (0.65″)Rated 0 out of 5(0 reviews)£189.99 Add to basket
- CAR AUDIO
Audison Prima AP5.9 bit
AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2 Ω. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.
Load. Imp. 5 Channels 4 Ohm 20 W x 2 + 50 W x 2 + 150 W x 1 2 Ohm 40 W x 2 + 90 W x 2 + 270 W x 1
Accessories [NOT INCLUDED]
DRC – Digital Remote Control
The DRC is the digital interface between the AP5.9 bit and the user. The DRC mounted in the vehicle dashboard, provides access to control of the inputs and volume adjustments, balance, fader and subwoofer volume. Providing source selection between main, aux and optical inputs, it also provides four of the configurations created and saved by the bit one right at hand. The DRC also controls the functions of the Audison Thesis amplifiers when these are installed in the same system.
DRC Cable Extension kit for installations on especially long vehicles. Total length of the supplied cable with the extension is equal to 6,5 m / 225,90″.
OP 1.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 1,5 m / 59,05″.
OP 4.5 • TOSLINK Optical Cable
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 4,5 m/177,16″
STA • F/F Socket TOSLINK adapter
Optical adapter to extend optical cables featuring TOSLINK connectors.
APL 2 – (AP4 D / AP1 D) link cable
Cable to connect AP5.9 bit to AP4 D and AP1 D amplifiers.
AP T-Harness “DCC”.
T-Harness “DCC” is the Plug&Play solution to integrate Audison Prima with the
factory car audio system.
AP Extension cables.
The Extension cable with Plug&Play connections allows total freedom in positioning the AP bit amplifiers.
AP Speakers Output cables.
The AP Speakers Output for AP5.9 bit is dedicated to the connection of the AP bit amplifiers with the input/output Extension cable.
SPM4 – 4 Ch Stereo Passive Mixer
Recommended to extend the number of inputs of AP bit amplifiers because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.Rated 0 out of 5(0 reviews)£649.99 Add to basket
- CAR AUDIO
Audison Prima AP 6.5
The Audison Prima AP6.5 – 6.5inch woofer -designed for upgrade & replacement with Oem type woofers that are generally fitted in vehicles that have a active system.
The Audison AP 6.5 feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofer don’t employ any filter, to maximize efficiency: the dome profile has been optimised with Klippel R&D Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.
Featuring a 32 mm pure copper mobile voice coil, for high power handling and outstanding low frequency control this Prima 6.5″ has a treated water-repellent paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimised using Klippel R&D Scan Vibrometer technology.
Comp Woofer Size 165 mm (6,5″) Power Handling 70 W Continuous Power
210 W Peak Power
Impedance 4 Ω Frequency Response 60 ÷ 5k Hz Sensitivity 93,5 dB/Spl Magnet High density flux ferrite Dome Water-repellent treated paper coneRated 0 out of 5(0 reviews)£84.99 Add to basket
- CAR AUDIO
Audison Prima AP1 D
The Prima AP1 D amplifier was designed to drive a subwoofer and is the ideal extension of the AP8.9 bit and AP4.9 bit. At 2 Ohms it is stable and can supply 540 W power with extremely compact dimension. With the APTK 3 (Audison Prima Tower Kit 3) staking system it’s possible to stack the AP1 D and save space without any problem of overheating.
Load. Imp. Mono 4 Ohm 310 W 2 Ohm 540 WRated 0 out of 5(0 reviews)£349.99 Add to basket